NDT Small Circular Quick Coupling Crimped Electric Connector
Details：
Y56 (XK) series circular small quick electric Connector, conform to HB6112-86 "XKE series small circular quick connect press connecting receptacle" standards. The series electric connectors features are: coupled by bayonet, quick connections and isolation, small size, light weight, high density of jiechuou, high reliability.
This serious products can reliably and fast connect and disconnect the circuit of radio equipment, and electrical equipment. Widely used in aviation, aerospace, weapons, electronics and other industrial products.
Sealed Connector mainly used for the electrical connections which need to maintain airtight performance such as the hermetic cabin and other electrical equipments and wireless radio.
Sealed wall-through Connector mainly used for the electrical connections which need to maintain airtight performance and wall accroading such as the hermetic cabin and other electrical equipments and wireless radio.
The series currently has seven shells, 29 hole group, and non-enclosed, sealed and sealed wall-through and other varieties. Accessories for the empennage have straight-line pressure type, retaining line pipe type, curved pressure line type and shielding type four varieties; Apart from the above four forms, other accessories for the empennage are also designed for users to choose.
Y56E (XKE) series small circular quick pressure Connector are equivalent to XKE Series products, and with the XK, XKE Series plugs, receptacle with the same type can match with each other, connect face to face with each other and to ensure its performance.
Conditions of Use
Ambient temperature －60℃～＋160℃
The relative humidity temperature of +40 ° C, 95 ~ 98%
Hermetic Seal socket and outside media pressure difference between ≥ 0.3MPa
Moisture resistance temperature of +40 ° C, relative humidity of 95 ~ 98% of the time for 144
Players with mold-resistant - 77-83 section 3.9 of 2
Frequency 10 ~ 500Hz, the acceleration up to 10g
Impact of Frequency 40 ~ 100 times / min, acceleration of 10 g
Constant acceleration up to 25g
Main technical characteristics
1.Rated voltage (see table 1)
table 1
Atmospheric pressure （P a） |
|
|
|
101326（760 mmH g） |
500 |
400 |
|
2266（17 mmH g） |
250 |
400 |
|
1000（7.5mmH g） |
200 |
400 |
Note : Connector Y56E (XKE) -1103 at atmospheric pressure for a 101326 P (760 mmHg), its rated working voltage of 115V.
2. Contact dual contact resistance (see table 2)
table 2
Contact dual diameter （mm） |
φ1.0 |
φ1.5 |
φ2.0 |
φ3.0 |
|
|
≤5 |
≤2.5 |
≤1.5 |
≤0.75 |
Note : Seal Connector contact resistance of less than table provides three times the ＆#118alue.
3.Insulation resistance (see table 3)
table 3
|
|
|
|
|
3000MΩ |
Moisture state (40 ° C, relative humidity of 95 ~ 98%) |
100 MΩ |
|
High temperature (160 ° C) |
500 MΩ |
4.Contact dual rated current (see table 4)
table 4
Contact dual diameter （mm） |
Actual ohmic contacts even |
|
|
φ1.0 |
1～15 |
5 |
|
16～29 |
4.5 |
|
30～40 |
4 |
|
41～61 |
3.5 |
|
φ1.5 |
1～10 |
10 |
|
11～16 |
9 |
|
17～20 |
8 |
|
φ2.0 |
1～5 |
20 |
|
6～10 |
18 |
|
φ3.0 |
1～2 |
40 |
|
3～4 |
36 |
|
5～8 |
32 |
5.Dielectric strength (see Table 5)
Table 5
|
|
Test voltage (V) (50 Hz RMS) |
|
|
|
1500 |
1 |
Moisture state (40 ° C, relative humidity of 95 ~ 98%) |
1125 |
Low temperature and low pressure state |
－60℃ 2266P a（17 mmH g） |
375 |
|
－60℃ 1000P a（7.5 mmH g） |
250 |
Note : Y56E (XKE) -1103 Connector in the normal state test voltage of 1000V;
In humid conditions test voltage of 500V;
The low temperature and low pressure (-60 ° C, 2266P a) state test voltage of 175V.
6.Shell contact resistance
Connector shell combine all of the total contact resistance less than 0.05 ohm.
7.Contact dual Single separation force (see Table 6)
Table 6
Contact dual diameter （mm） |
Even a single exposure Pullout （N） |
|
φ1.0 |
1.0～3.0 |
|
φ1.5 |
1.5～4.0 |
|
φ2.0 |
2.5～5.0 |
|
φ3.0 |
3.9～6.9 |
8. Mechanical life
Connecting 500 Separation
Categories and Specifications
|
|
|
Markers |
Remarks |
|
1 |
Plug Block, said the main code |
Y56E(XKE) |
|
|
2 |
Socket and panels with diameter (type) |
11、14、18、24、27、30、36 |
|
|
3 |
|
Side |
|
|
|
|
Y |
|
|
4 |
|
|
CRIMPING |
F |
|
|
|
J |
|
|
|
CRIMPING |
R |
|
|
5 |
Even the total number of contacts |
|
|
|
6 |
|
|
|
Z |
|
|
sealed |
M
|
|
|
|
|
|
|
7 |
|
|
P |
|
|
|
Q |
|
|
|
S |
|
|
|
W |
|
|
|
|
|
|
8 |
shell variable bit keys |
Normal bond |
|
|
|
|
1 |
|
|
second key change |
2 |
|
|
third key change |
3 |
|
|
fourth change keys |
4 |
|
|
9 |
Socket installation code form |
Before installing sockets |
|
|
|
|
H |
|
|
10 |
|
|
A、B、C… |
Under the modified code Chinese pinyin alphabetical order (O.I not use) |
