" />
Home > Products >NDT pulling/pushing Circular Electric Connector

Products Overview


RF Antenna Productss




Contact Us:


Sales support:
info@hinoycables.com


Technical support:
engineering@hinoycables.com

NDT pulling/pushing Circular Electric Connector

Details：

Y57 series pulling/pushing circular electric connector is a new type quick insert and separate connector which combine the merits of the bayonet locking and quick insert and separate connectors. They have rapid operation, safety and reliability and so on characteristics which are the ideal products those can replace circular electric connector. Conform to the general norm of GJB2905 good resistant environment with push / pull-type rapid separation Circular Connector.

Products labeled code
 
Plug
 
 
Socket
 
 
Categories
Code-series
Categories
A
B
Significance
Diameter Φ1 Welded Shell Electroless nickel
Diameter Φ1.5Welded Shell Electroless nickel
　
Positioning logo:　
Its primary key and a secondary form of bond angle, may inject up.
The second main and auxiliary keys bond angle form.

Case No.:　
Shell connector relative size of a logo into 08,10,12,14,16,18,20,22,24,26

Contact Number:　
Connector contact with the number of pieces of identification, see Contacts specific type spectra.

Plugs and sockets logo:　
T-representative Plug    Z-socket representatives

Contacts form:　
J-pin representatives    K-jack representatives

Mei enclosures forms
　
Symbols
L
L1
L2
Significance
Folder plate line
Ground-clamping
Waterproof crimping

Socket installation form
 
Symbols
B
L
S
Significance
Panel installation
Cable
Wear wall

Seal 
M - silicone seal    H-sealed glass
　
Use environmental conditions and technology indicators　
Use of the environment
Temperature :-55～＋125 ℃
Relative humidity :40±2℃时，95±3%
Working Pressure :1.33Pa～101.3KPa
Vibration :Sine Vibration :10～50HZ时，Amplitude1.5mm；
50～2000HZ，Acceleration 196m/s2
Impact : Acceleration 980m/s2
Salt Spray :48h，96h;
 
Specifications 
contact resistance　
Pin-diametermm
Φ1.0
Φ1.5
Φ2.5
Φ3.5
Φ5.0
Φ7.0
Φ10.0
contact resistance（MΩ）
≤5
≤3
≤1.5
≤1
≤1
≤0.5
≤0.4

Contacts rated current

Contacts interpolation diameter distribution
(mm)
1.0
1.5
2.5
3.5
5.0
7.0
10.0
Contacts rated current
（A）
5
10
25
50
75
100
200

Insulation resistance：
       standard pressure：4000MΩ  high temperature：1000 MΩ   humidity：100 MΩ

Media Pressure：
       standard pressure：1500V   lower air pressure：200V

Socket hermetic：
       Rubber : leakage rate not more than one Pa.cm3 / S
       Glass sealed : leakage rate is not more than 1 × 10-4Pa.cm3 / S
Mechanical life-span 500

pin shape size
 
　
Shell NO. 
08
10
12
14
16
20
22
24
26
D
19.5
21.5
23.5
26
28
33.5
36.5
39.5
43
ΦD­­­1
6
8
8
10
12
14
15
17
18
　
receptacle shape size
　
　
Shell NO. 
08
10
12
14
16
20
22
24
26
D
21
22
24
26
27
33
36
39
42
S
15
16
18
20
21
26
28
31
33
t
1.5
1.5
1.5
1.5
1.5
2.0
2.0
2.5
2.5
ΦD­­­1
14.5
16.5
18.5
20.5
22.5
27.5
,
30.5
33.5
36.5
 
Series-spectrum (from the surface to see inserted a jack-insulator - plate installation)
 
Operation explanation 
When plug and receptacle inserted with each other, push locking covering tightly then rotate to the right direction, after your hands relaxed, watching the locking cover, make the red warning line covered by it, now it is under locking state, inserting is completed. When separate plug and receptacle, rotate to the left direction while push the locking covering award, the locking covering will rebound automatic. Now, it has been unlocked, the plug can be separated to make the separation come into true.  

Applied Technology

NDT pulling/pushing Circular Electric Connector